View 74ALS10A_474635.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74ALS10A Triple 3-Input NAND gate
Product specification IC05 Data Handbook 1991 Feb 08
Philips Semiconductors
Philips Semiconductors
Product specification
Triple 3-input NAND gate
74ALS10A
TYPE 74ALS10A
TYPICAL PROPAGATION DELAY 4.0ns
TYPICAL SUPPLY CURRENT (TOTAL) 1.8mA
PIN CONFIGURATION
1A 1B 2A 1 2 3 4 5 6 7 14 VCC 13 1C 12 1Y 11 3C 10 3B 9 8 3A 3Y
ORDERING INFORMATION
ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C 74ALS10AN 74ALS10AD DRAWING NUMBER
2B 2C 2Y GND
14-pin plastic DIP 14-pin plastic SO
SOT27-1 SOT108-1
SC00014
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS nA, nB, nC nY Data inputs Data outputs DESCRIPTION 74ALS (U.L.) HIGH/LOW 1.0/1.0 20/80 LOAD VALUE HIGH/LOW 20A/0.1mA 0.4mA/8mA
NOTE: One (1.0) ALS unit load is defined as: 20A in the High state and 0.1mA in the Low state.
LOGIC SYMBOL
IEC/IEEE SYMBOL
1
&
12
1
2
13
3
4
5
9
10
11
2 13
1A 1B 1C 2A 2B 2C 3A 3B 3C
3 4 5 6
1Y 2Y 3Y 9 10 12 VCC = Pin 14 GND = Pin 7 6 8 11 8
SC00016
SC00017
LOGIC DIAGRAM
1A 1B 1C 2A 2B 2C 3A 3B VCC = Pin 14 GND = Pin 7 3C 1 2 13 3 4 5 9 10 11 12 1Y
FUNCTION TABLE
INPUTS nA H
6 2Y
OUTPUT nC H X X L nY L H H H
nB H X L X
L X
8
X
3Y
SC00015
H = High voltage level L = Low voltage level X = Don't care
1991 Feb 08
2
853-0858 01670
Philips Semiconductors
Product specification
Triple 3-input NAND gate
74ALS10A
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state Current applied to output in Low output state Operating free-air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to VCC 16 0 to +70 -65 to +150 UNIT V V mA V mA C C
RECOMMENDED OPERATING CONDITIONS
LIMITS SYMBOL VCC VIH VIL IIk IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature range 0 PARAMETER MIN 4.5 2.0 0.8 -18 -0.4 8 +70 NOM 5.0 MAX 5.5 V V V mA mA mA C UNIT
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL VOH VO OL VIK II IIH IIL IO ICC PARAMETER High-level output voltage Low-level Low level output voltage Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current Output current3 ICCH ICCL TEST CONDITIONS1 MIN VCC10%, VIL = MAX, VIH = MIN, IOH = -0.4mA VCC = MIN, VIL = MAX, , , VIH = MIN VCC = MIN, II = IIK VCC = MAX, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.5V VCC = MAX, VO = 2.25V VCC = MAX VI = 0V VI = 4.5V -30 0.5 1.6 IOL = 4mA IOL = 8mA VCC - 2 0.25 0.35 -0.73 0.40 0.50 -1.5 0.1 20 -0.1 -112 0.6 2.2 LIMITS TYP2 UNIT MAX V V V V mA A mA mA mA mA
Supply current (total)
NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. The output conditions have been chosen to produce a current that closely approximate one half of the true short-circuit output current, IOS.
1991 Feb 08
3
Philips Semiconductors
Product specification
Triple 3-input NAND gate
74ALS10A
AC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = 0C to +70C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN tPLH tPHL Propagation delay nA, nB, nC to nY Waveform 1 2.0 2.0 MAX 11.0 10.0 ns UNIT
AC WAVEFORMS
For all waveforms, VM = 1.3V.
nA, nB, nC
VM tPHL
VM tPLH VM VM
nY
SC00018
Waveform 1. Propagation Delay for Data to Output
TEST CIRCUIT AND WAVEFORMS
VCC NEGATIVE PULSE VIN PULSE GENERATOR RT D.U.T. VOUT 90% VM 10% tTHL (tff) CL RL tw VM 10% tTLH (tr ) 0.3V 90% AMP (V)
tTLH (tr ) 90%
tTHL (tf ) AMP (V) 90% VM tw 10% 0.3V
Test Circuit for Totem-pole Outputs
POSITIVE PULSE 10%
VM
DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
Input Pulse Definition INPUT PULSE REQUIREMENTS Family Amplitude VM 74ALS 3.5V 1.3V Rep.Rate 1MHz tw 500ns tTLH 2.0ns tTHL 2.0ns
SC00005
1991 Feb 08
4
Philips Semiconductors
Product specification
Triple 3-input NAND gate
74ALS10A
DIP14: plastic dual in-line package; 14 leads (300 mil)
SOT27-1
f1991 Feb 08
5
Philips Semiconductors
Product specification
Triple 3-input NAND gate
74ALS10A
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
f1991 Feb 08
6
Philips Semiconductors
Product specification
Triple 3-input NAND gate
74ALS10A
DEFINITIONS
Data Sheet Identification
Objective Specification
Product Status
Formative or in Design
Definition
This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.
Preliminary Specification
Preproduction Product
Product Specification
Full Production
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1997 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 05-96
Philips Semiconductors
f1991 Feb 08 7

▲Up To Search▲

Price & Availability of 74ALS10A

	To Download 74ALS10A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .